CONNECT
Mon-Fri: 8:00 am - 6:00 pm
Sat: 9:00 am - 2:00 pm

PJ Trailers-Click on Featured Inventory for in stock trailers.

Car Haulers & Equipment

5 ft. Channel Buggy Hauler (B5)

Standard Features
  • 7,000 lb. G.V.W.R.
  • 3,500 lb. x 2 G.A.W.R.
  • 2” Ball Bulldog Coupler
  • Safety Chains
  • 1 - Top Wind Drop-Leg Jack (8,000 lb.)
  • 2 Dexter E-Z lube Axles, Idler & Brake (3,500 lb)
  • 4 Leaf Double-eye Spring Suspension
  • 4 - NEW 15” Black Mod Wheels
  • 4 Provider ST205/75R15 Radial Tires (1,820 lb)
  • Electric Breakaway Kit w/ Charger
  • Rubrail & Stake Pockets
  • 9” High Drive Over DP Steel Fenders
  • 5’ Channel Ramps w/ Holder
  • 5” Channel Frame & Tongue
  • 3” Channel Crossmembers 24” on Center
  • 2” Treated Pine Lumber Deck
  • 102” Wide Deck
  • DOT Approved Flushmount LED Lights
  • Sealed Wire Harness
  • Sand Blasted, Acid Washed, Powder Coated
  • 82 1/2 ” Between the Fenders

Learn More

Single Axle HD Carhauler (C1)

Standard Features
  • 7,000 lb. G.V.W.R.
  • 7,000 lb. x 1 G.A.W.R.
  • 2” Ball Adjustable Bulldog Coupler
  • Safety Chains
  • 1 - Drop Leg Jack (8,000 lb.)
  • 1 - Dexter E- Z lube Brake Axle (7,000 lb)
  • 6 Leaf Slipper Spring Suspension
  • 2 - 16” Black Mod Wheels
  • 2 Provider 235/80R16 Radial Tires (3,520 lb)
  • Stake Pockets
  • Electric Breakaway Kit w/ Charger
  • Removable Tread-plate Steel Fenders
  • 5’ Channel Ramps w/ Holder
  • 5” Channel Frame & Tongue
  • 3” Channel Crossmembers 16” on Center
  • 2” Treated Pine Lumber Deck
  • 83” Wide Deck (Except with Drop Axles)
  • DOT Approved Flushmount Lifetime LED Lights
  • Sealed Wire Harness
  • Sand Blasted, Acid Washed, Powder Coated

Learn More

Angle Pipetop Trailer (P8)

Standard Features
  • 14,000 lb. G.V.W.R.
  • 7,000 lb. x 2 G.A.W.R.
  • Adjustable 2 5/16” Ball Bulldog Coupler
  • Safety Chains
  • 1 - Jack (7,000 lb.)
  • 2 - Dexter E- Z lube Brake Axles (7,000 lb.)
  • 6 Leaf Slipper Spring Suspension
  • 4 - 16” Black Mod Wheels
  • 4 Provider 235/80R16 Radial Tires (3,520 lb)
  • Electric Breakaway Kit w/ Charger
  • 5’ Channel Ramps w/ Holder
  • 2x3 Angle Upright
  • 2 7/8 Pipe Top Rail
  • 5” Channel Tongue & 3” x 5” Angle Frame
  • 3” Channel Crossmembers 16” on Center
  • 2” Treated Pine Lumber Deck
  • DOT Approved Flushmount Lifetime LED Lights
  • Sealed Bargman Wire Harness w/ 7-Way RV Plug
  • Sand Blasted, Acid Washed, Powder Coated
  • GN Option Equipped with 2 Jacks
  • GN Equipped w/Lockable Front Toolbox

Learn More

 
 

Dumps

78 in. Medium Duty Dump (D2)

 
Standard Features
  • 9,900 lb. G.V.W.R.
  • 5,200 lb. x 2 G.A.W.R.
  • 2 5/16” A Frame Bulldog Coupler
  • Safety Chains
  • 1 - Drop Leg Jack (7,000 lb.)
  • 2 - Dexter E- Z lube Brake Axle (5,200 lb.)
  • 6 Leaf Slipper Spring Suspension
  • 4 - 15” Black Mod Wheels
  • 4 Provider 225/75R15 Radial Tires ( lb.)
  • Electric Breakaway Kit w/ Charger
  • DOT Reflective Tape
  • Treadplate Steel Fenders
  • Lockable Toolbox (Houses Battery and Pump)
  • Barn Door Gate
  • 40° Dump Pitch
  • 12VDC Hydraulic Pump
  • 5” x 30” West Craft Hyd. Cylinder
  • 12’ Control Cable
  • Mounting Brackets for Roll-up Tarp
  • 5” Channel Main Frame & Tongue
  • 3” Channel Crossmembers
  • 10ga. Steel Bed
  • 78” Wide Bed
  • 18” 12ga Steel Sides
  • DOT Approved Flushmount Lifetime LED Lights
  • Sealed Bargman Wire Harness w/ 7-Way RV Plug
  • Sand Blasted, Acid Washed, Powder Coated
  • Interstate (TM) Deep Cycle Battery
  • Integrated 12V Trickle Charger
  • 110V Battery Charger

Learn More

83 in. High Side Dump (DH)

Standard Features
  • 14,000 lb. G.V.W.R.
  • 7,000 lb. x 2 G.A.W.R.
  • 2 5/16” Ball Adjustable Bulldog Coupler
  • Safety Chains
  • 1 - Top Wind Drop Leg Jack (8,000 lb.)
  • 2 - Dexter E-Z Lube Brake Axles (7,000 lb.)
  • 6 Leaf Slipper Spring Suspension
  • 4 - 16” Black Mod Wheels
  • 4 - 235/80R16 Provider Radial Tires (3,520 lb.)
  • Defender II Electric Breakaway Kit w/ Charger
  • 3M DOT Reflective Tape
  • 1/8” Treadplate Steel Fenders
  • Lockable Toolbox (Houses Battery and Pump)
  • 2 - Way Gate (Barn Doors & Spreader Gate)
  • 6’ 6” Slide In Channel Ramps
  • 4 - D-Rings (Welded inside the Box)
  • 40° Dump Pitch
  • 12VDC KTI Hydraulic Pump
  • 5” x 17” West Craft Hyd. Cylinder w/Scissor Lift
  • 12’ Control Cable
  • Mounting Brackets for Roll-up Tarp
  • 6” Channel Main Frame & Tongue
  • 2” x 6” x 11ga. Tubing Bed Frame
  • 3” Channel Crossmembers 16” on Center
  • 10ga. HD Steel Bed
  • 83” Extra Wide Bed
  • 10ga. HD Steel Sides
  • 48” High Sides (36” Available)
  • Optronics Flushmount Lifetime LED Lights
  • Bargman Sealed Wire Harness w/ 7-Way RV Plug
  • Stake Pockets for Extensions
  • Sand Blasted, Acid Washed, Powder Coated
  • Interstate (TM) Deep Cycle Battery
  • Integrated 12V Trickle Charger
  • 110V Battery Charger
  • GN Option Equipped with 2 -10k Jacks
  • GN Option Equipped with Front Toolbox

Learn More

10 in. I-Beam Deckover Dump (DT)

Standard Features
  • 14,000 lb. G.V.W.R.
  • 7,000 lb. x 2 G.A.W.R.
  • Adjustable 2 5/16” Ball Bulldog Coupler
  • Safety Chains
  • 1 - Drop Leg Jack (7,000 lb.)
  • 2 - Dexter E- Z lube Brake Axle (7,000 lb.)
  • 6 Leaf Slipper Spring Suspension
  • 4 - 16” Black Mod Wheels
  • 4 Provider 235/80R16 Radial Tires (3,520 lb)
  • Electric Breakaway Kit w/ Charger
  • DOT Reflective Tape
  • Lockable Toolbox (Houses Battery and Pump)
  • 2 - Way Gate (Barn Doors & Spread Gate)
  • 80” Slide In Channel Ramps
  • 4 - D-Rings
  • 40° Dump Pitch
  • 12VDC Hydraulic Pump
  • 5” x 21” West Craft Hyd. Cylinder w/Scissor Lift
  • 12’ Control Cable
  • 10” I-Beam Tongue
  • Mounting Brackets for Roll-up Tarp
  • 10” I-Beam Main Frame
  • 10ga. Fabricated Bed Frame
  • 3” Channel Crossmembers 16” on Center
  • 2” x 6” x 11ga. Tubing Outer Bed Frame
  • 10ga. Steel Bed
  • 96” Wide Bed
  • 10ga. Steel Sides
  • 19” High Fold Down Sides
  • DOT Approved Flushmount Lifetime LED Lights
  • Sealed Bargman Wire Harness w/ 7-Way RV Plug
  • Sand Blasted, Acid Washed, Powder Coated
  • Interstate (TM) Deep Cycle Battery
  • 110V Integrated Trickle Charger
  • GN Option Equipped with 2 Jacks
  • GN Equipped w/Lockable Front Toolbox

Learn More

 
 

Flatdecks & Deckovers

8 in. I-Beam Deckover (F8)

Standard Features
  • 14.,000 lb. G.V.W.R.
  • 7,000 lb. x 2 G.A.W.R.
  • Adjustable 2 5/16” Ball Bulldog Coupler
  • Safety Chains
  • 1 - Drop Leg Jack (10,000 lb.)
  • 2 - Dexter E- Z lube Brake Axles (7,000 lb.)
  • 6 Leaf Slipper Spring Suspension
  • 4 - 16” Black Mod Wheels
  • 4 Provider 235/80R16 Radial Tires (3,520 lb)
  • Rubrail & Stake Pockets
  • Electric Breakaway Kit w/ Charger
  • DOT Reflective Tape
  • Tool Tray In Tongue
  • 6’ 6” Slide in Ramps w/ Holders
  • 8” x 10 lb. I-Beam Tongue
  • 8” x 10 lb. I-Beam Main Frame
  • 3” Channel Crossmembers 16” on Center
  • 2” Treated Pine Lumber Deck
  • 96” Wide Deck
  • 2 x 6 x 1/8” Square Tubing Outer Deck Frame
  • DOT Approved Flushmount Lifetime LED Lights
  • Amber Side Turn Flashers
  • Sealed Bargman Wire Harness w/ 7-Way RV Plug
  • Sand Blasted, Acid Washed, Powder Coated
  • GN Option Equipped with 2 Jacks
  • GN Equipped with Lockable Front Toolbox
  • GN Equipped with Chain Holder

Learn More

Classic Flatdeck with Singles (FS)

Standard Features
  • 15,680 lb. G.V.W.R.
  • 7,000 lb. x 2 G.A.W.R.
  • GN 2 5/16” Ball Bulldog Coupler 25,000 lb
  • Safety Chains
  • 2 - Drop Leg Jacks (10,000 lb.)
  • 2 - Dexter E- Z lube Brake Axles (7,000 lb.)
  • 6 Leaf Slipper Spring Suspension
  • 4 - 16” Black Mod Wheels
  • 4 Provider 235/80R16 Radial Tires (3,520 lb)
  • Rubrail & Stake Pockets
  • Electric Breakaway Kit w/ Charger
  • DOT Reflective Tape
  • Monster Steps on Both Sides
  • Lockable Front Toolbox w/ Chain Holder
  • 8’ Ramps w/ Holders
  • 12” x 14 lb. I-Beam Main Frame, Riser & Neck
  • Frame Bridge Standard on 30’ and up.
  • 3” Channel Crossmembers 16” on Center
  • 2 x 6 x 1/8” Square Tubing Outer Deck Frame
  • 2” Treated Pine Lumber Deck
  • 102” Wide Deck
  • DOT Approved Flushmount Lifetime LED Lights
  • Amber Side Turn Flashers
  • Sealed Bargman Wire Harness w/ 7-Way RV Plug
  • Sand Blasted, Acid Washed, Powder Coated

Learn More

Pipe Hauler (PT)

Standard Features
  • 15,680 lb. G.V.W.R.
  • 7,000 lb. x 2 G.A.W.R.
  • GN 2 5/16” Ball Bulldog Coupler 25,000 lb
  • Safety Chains
  • 1- Drop Leg Jacks (10,000 lb.)
  • 2 - Dexter E- Z lube Brake Axles (7,000 lb.)
  • 6 Leaf Slipper Spring Suspension
  • 4 - 16” Black Mod Wheels
  • 4 Provider 235/80R16 Radial Tires (3,520 lb)
  • Electric Breakaway Kit w/ Charger
  • DOT Reflective Tape
  • Lockable Front Toolbox w/ Chain Holder
  • 12” x 14 lb. I-Beam Main Frame, Riser & Neck
  • DOT Approved Flushmount Lifetime LED Lights
  • Amber Side Turn Flashers
  • Sealed Bargman Wire Harness w/ 7-Way RV Plug
  • Sand Blasted, Acid Washed, Powder Coated
  • In Frame Tool Tray 48” X 54”
  • Headache Rack w/ Bumper Pull Option

Learn More

 
 

Tilts

Single Axle HD Tilt (T1)

Standard Features
  • 7,000 lb. G.V.W.R.
  • 7,000 lb. x 1 G.A.W.R.
  • 2” Ball Adjustable Bulldog Coupler
  • Safety Chains
  • 1 - Drop Leg Jack (8,000 lb.)
  • 1 - Dexter E- Z lube Brake Drop Axle (7,000 lb)
  • 2 - 16” Black Mod Wheels
  • 2 Provider 235/80R16 Radial Tires (3,520 lb)
  • Stake Pockets
  • Electric Breakaway Kit w/ Charger
  • Removable Tread-plate Steel Fenders
  • Expanded Metal Tool Tray In Tongue
  • 11 Degree Tilt Angle
  • Hydraulic Cushion Cylinder w/ Reservoir
  • 5” Channel Tongue
  • 5” x 2” Steel Tube Frame
  • 3” Channel Crossmembers 16” on Center
  • 2” Treated Pine Lumber Deck
  • 81” x 13’ Tilting Deck
  • 81” Between Fenders
  • DOT Approved Flushmount Lifetime LED Lights
  • Sealed Bargman Wire Harness w/ 7-Way RV Plug
  • Sand Blasted, Acid Washed, Powder Coated
  • Knife Edge Tail
  • 4 Recessed D-rings & 1 Center D-ring
  • Bull Nose Bumper
  • Mitered Front Corners

Learn More

8 in. Channel Tilt (T7)

Standard Features
  • 14,000 lb. G.V.W.R.
  • 7,000 lb. x 2 G.A.W.R.
  • Adjustable 2 5/16” Ball Bulldog Coupler
  • Safety Chains
  • 1 - Drop Leg Jack (10,000 lb.)
  • 2 - Dexter E- Z lube Brake Axles (7,000 lb.)
  • Torsion Suspension
  • 4 - 16” Black Mod Wheels
  • 4 Provider 235/80R16 Radial Tires (3,520 lb)
  • Stake Pockets & Rubrail
  • Electric Breakaway Kit w/ Charger
  • 9” x 72” Treadplate Removable Steel Fenders
  • Tool Tray In Tongue
  • 13 Degree Tilt Pitch
  • 3” x 16” Cylinder
  • 8” Channel Frame & Tongue
  • 3” Channel Crossmembers 16” on Center
  • 2” Treated Pine Lumber Deck
  • 74” Wide Tiltable Deck
  • 82” Between Fenders
  • DOT Approved Flushmount Lifetime LED Lights
  • Sealed Bargman Wire Harness w/ 7-Way RV Plug
  • Sand Blasted, Acid Washed, Powder Coated
  • GN Option Equipped with 2 Jacks
  • GN Equipped w/Lockable Front Toolbox

Learn More

Tandem Dual Tilt (TD)

Standard Features
  • 25,000 lb. G.V.W.R.
  • 10,000 lb. x 2 G.A.W.R
  • GN 2 5/16” Ball Bulldog Coupler 25,000 lb
  • Safety Chains
  • 2 - Dropleg Jacks (10,000 lb.)
  • 2 - Dexter Oil Bath Axles (10,000 lb.)
  • Torsion Suspension
  • 8 Dual Wheels, 16” Grey, 8 on 6.5” Bolt Pattern
  • 8 Provider 16” 235/80R16 Radial Tires (3,090 lb)
  • Rubrail & Stake Pockets
  • Electric Breakaway Kit w/ Charger
  • DOT Reflective Tape
  • Monster Steps on Both Sides
  • Lockable Front Toolbox w/ Chain Holder
  • Self-rising Bumper
  • 24’ Tilt Portion w/ 15 Degree Tilt Pitch
  • 12VDC Hydraulic Pump
  • Scissor Lift
  • 12” x 19 lb. I-Beam Main Frame, Riser & Neck
  • 8” x 15 lb. I-lb. Deck Frame
  • 2 x 6 x 1/8” Square Tubing Outer Deck Frame
  • 3” Channel Crossmembers 16” on Center
  • Frame Bridging on 30’ and Longer
  • 2” Treated Pine Lumber Deck
  • 102” Wide Deck
  • DOT Approved Flushmount Lifetime LED Lights
  • Sealed Bargman Wire Harness w/ 7-Way RV Plug
  • Sand Blasted, Acid Washed, Powder Coated
  • 110V Battery Charger
  • Interstate (TM) Deep Cycle Battery
  • 5” x 17” West Craft Hyd. Cylinder w/Scissor Lift

Learn More

 
 

Utilities

60 in. All-Steel Utility (A6)

Standard Features
  • 3,500 lb. G.V.W.R.
  • 3,500 lb. x 1 G.A.W.R.
  • 2” Ball Bulldog Coupler
  • Safety Chains
  • 1 - Bulldog Pipe Mount Swivel Jack (5,000 lb.)
  • 1 - Dexter E- Z lube Idler Axle (3,500 lb.)
  • 4 Leaf Double-eye Spring Suspension
  • 2 - NEW 15” White Spoke Wheels
  • 2 Provider ST205/75R15 Radial Tires (1,820 lb)
  • 9” x 33” Treadplate Removable Alum Fenders
  • 12ga Solid Steel Sides
  • 3” Channel Tongue
  • 2 1/2” x 2 1/2” x 3/16” Angle Crossmembers
  • 4” Channel Tongue
  • 1/8” Diamond Plate w/ 4 Flushmount D-Rings
  • 60” Wide Deck
  • 4ft Expanded Metal Gate
  • DOT Approved Flushmount Lights
  • Sand Blasted, Acid Washed, Powder Coated

Learn More

60 in. Channel Utility (U6)

Standard Features
  • 2,990 lb. G.V.W.R.
  • 3,500 lb. x 1 G.A.W.R.
  • 2” Ball Bulldog Coupler
  • Safety Chains
  • 1 - Bulldog Pipe Mount Swivel Jack (5,000 lb.)
  • 1 - Dexter E- Z lube Idler Axle (3,500 lb.)
  • 4 Leaf Double-eye Spring Suspension
  • 2 - NEW 15” White Spoke Wheels
  • 2 Provider ST205/75R15 Radial Tires (1,820 lb)
  • Stake Pockets
  • 9” x 33” Treadplate Removable Alum Fenders
  • 4” Channel Frame & Tongue
  • 2 1/2” x 2 1/2” x 3/16” Angle Crossmembers
  • 2” x 2” Removable Side Rail
  • 2” x 2” Top Rail
  • 2” Treated Pine Lumber Deck
  • 60” Wide Deck
  • DOT Approved Flushmount Lights
  • Sealed Wire Harness
  • Sand Blasted, Acid Washed, Powder Coated

Learn More

77 in. Channel Utility (U7)

Standard Features
  • 2,990 G.V.W.R.
  • 3,500 x 1 G.A.W.R.
  • 2” Ball Bulldog Coupler
  • Safety Chains
  • 1 - Bulldog Pipe Mount Swivel Jack (5,000 lb.)
  • 1 - Dexter E- Z lube Idler Axle (3,500 lb.)
  • 4 Leaf Double-eye Spring Suspension
  • 2 - NEW 15” White Spoke Wheels
  • 2 Provider ST205/75R15 Radial Tires (1,820 lb)
  • Stake Pockets
  • 9” x 33” Treadplate Removable Alum Fenders
  • 4” Channel Frame & Tongue
  • 2 1/2” x 2 1/2” x 3/16” Angle Crossmembers
  • 2” x 2” Removable Side Rail
  • 2” x 2” Top Rail
  • 2” Treated Pine Lumber Deck
  • 77” Wide Deck
  • DOT Approved Flushmount Lights
  • Sealed Wire Harness
  • Sand Blasted, Acid Washed, Powder Coated

Learn More

 

83 in. Channel Utility (U8)

Standard Features
  • 2,990 G.V.W.R.
  • 3,500 x 1 G.A.W.R.
  • 2” Ball Bulldog Coupler
  • Safety Chains
  • 1 - Bulldog Pipe Mount Swivel Jack (5,000 lb.)
  • 1 - Dexter E- Z lube Idler Axle (3,500 lb.)
  • 4 Leaf Double-eye Spring Suspension
  • 2 - NEW 15” White Spoke Wheels
  • 2 Provider ST205/75R15 Radial Tires (1,820 lb)
  • Stake Pockets
  • 9” x 33” Treadplate Removable Alum Fenders
  • 4” Channel Frame & Tongue
  • 2 1/2” x 2 1/2” x 3/16” Angle Crossmembers
  • 2” x 2” Removable Side Rail
  • 2” x 2” Top Rail
  • 2” Treated Pine Lumber Deck
  • 83” Wide Deck
  • DOT Approved Flushmount Lights
  • Sealed Wire Harness
  • Sand Blasted, Acid Washed, Powder Coated

Learn More

 

Get a Quote

Please enter your contact information and one of our representatives will get back to you with more information.

Click to Call

Please enter your name and phone number to get calling options.